Here’s Why Schneider Charge Could Be the Smartest Home EV Charger You Install
August 25, 2026
If you’ve ever looked into adding a home EV charger, you’ve probably run into the same frustrating news that surprises so many new EV owners: your electrical panel might need an upgrade first. And that upgrade can cost thousands of dollars before a single charging cable is ever installed.
But a new home EV charger from Schneider Electric is changing that story for homeowners across the country. It’s called Schneider Charge, and it’s built to integrate seamlessly with your existing home setup—no costly panel upgrades needed.
Here’s everything you need to know about Schneider Charge, what makes it different, and how Qmerit can get one installed at your home quickly and easily.
What Is Schneider Charge?
Schneider Charge is a residential Level 2 EV charger made by Schneider Electric, the same company that millions of American homes already trust for electrical panels, circuit breakers, and home energy products.
If you’re new to the world of home EV charging, here is the quick version: a Level 2 charger connects to a 240-volt circuit in your home (the same type of circuit a clothes dryer or electric stove uses) and charges your car many times faster than a standard wall outlet.
Most EV owners with a Level 2 charger wake up every morning to a full battery, no matter how much of the range they used the day before.
Schneider Charge is a hardwired unit, meaning it’s permanently connected to your home’s electrical system rather than plugged into an outlet. That makes it more reliable, safer, and eligible for most utility EV charging rebates and local incentives.
A few basics worth knowing right away:
- It delivers up to up to 44 miles of range per hour, which is enough to fully charge most electric vehicles overnight
- It comes with a 25-foot cable, so you have plenty of reach whether you park nose-in or back into your garage
- It is available with two connector types: NACS (used by Tesla and many newer EVs) and J1772 (the standard connector for most other EVs), so it works with virtually any electric vehicle on the road today
- It is built for indoor or outdoor installation, and it is rated to handle everything from bitter cold winters to scorching summer heat
- It carries a 3-year warranty and is Energy Star certified
In short, Schneider Charge is a well-built, smart, flexible charger from a brand homeowners already know and trust.
SmartAmp Load Management Built into the Charge EVSE
SmartAmp is the technology that sets Schneider Charge apart from standard home EV chargers.
Here is how it works in everyday terms: current transformers (small sensor devices) wire directly to your home’s electrical panel and monitor how much power your home is using in real time.
When your dishwasher kicks on, or someone starts the dryer, or your AC spools up on a hot afternoon, SmartAmp notices the increase in electrical demand and automatically dials back the charging speed to keep your home’s total power use within safe limits.
When the demand drops back down, it speeds charging back up automatically.
You do not have to do anything. You don’t even have to think about it. It just works in the background, making sure your home never exceeds its electrical capacity.
A few things that make SmartAmp especially practical for homeowners:
- No extra hardware to buy. The current transformers that enable load monitoring come included with the charger.
- No extra breaker spots needed. You do not have to sacrifice space in your panel for monitoring equipment.
- It does not rely on your Wi-Fi. Even if your internet goes out, SmartAmp keeps doing its job. The monitoring is hardwired directly to your panel.
- It is the only UL 3141 certified residential EV charger, which means it meets the safety standard specifically designed for load-managed EV charger installations.
For homeowners who have been told they might need a panel upgrade before adding an EV charger, SmartAmp technology could be the solution that makes the whole project far more affordable.
Key Features of Schneider Charge
Powerful Enough to Charge Overnight
At up to 11.5 kW of output, Schneider Charge can add up to 44 miles of range per hour and meet the real-world charging needs of virtually any electric vehicle available today. Most EV owners with this level of charging can plug in when they get home and wake up to a fully charged battery every morning, even if they drove a lot the day before.
Built to Handle Whatever Your Home Throws at It
Schneider Charge is designed for the real world. It carries a Type 4 enclosure rating, which means it is fully sealed against rain, dust, and other outdoor elements. It handles operating temperatures from -22 degrees F all the way up to 122 degrees F.
Whether you’re dealing with a Minnesota winter or an Austin summer, this charger is built to keep working.
It can be mounted indoors or outdoors, and it is just as at home on a garage wall as it is on the exterior of your house next to the driveway.
Works with Your Car, Whatever You Drive
Schneider Charge is available in two versions to match the two most common EV connector types in the U.S.:
- NACS (J3400): The connector used by Tesla vehicles and a growing number of other EVs adopting the North American Charging Standard
- J1772: The connector used by most non-Tesla EVs, including vehicles from Ford, Hyundai, Chevrolet, Rivian, BMW, Kia, and many others
Smart App Control That Saves You Money
The Schneider Charge app gives you real-time visibility into your charging sessions right from your phone. You can check how fast your car is charging, see when SmartAmp load management is active, and most importantly, schedule your charging to happen during off-peak hours when electricity rates are at their lowest.
For many homeowners, smart scheduling alone can meaningfully reduce the monthly cost of charging an EV at home.
If your utility offers time-of-use rates (many do), charging your car between midnight and 6 a.m. instead of during the evening could save you a noticeable amount over the course of a year.
Designed for a Smooth, Fast Installation
Schneider Charge is built with the installer in mind, too. Electricians commission the unit using the eSetup app, which streamlines the setup process and reduces the time spent on your job.
That means a faster, smoother installation day for you and lower labor costs in many cases.
Is Schneider Charge Right for You?
Schneider Charge is a strong fit for most homeowners who are ready to add Level 2 EV charging at home.
It’s a great choice if:
- You own—or are planning to own—an electric vehicle and want a smarter, more seamless charging experience at home.
- You want faster, more reliable charging than a standard outlet can deliver.
- You have a garage, carport, or exterior wall ready for a clean, professional installation.
- You’ve been told you may need a costly panel or service upgrade—but prefer a solution that can help you avoid it with intelligent load management.
- You’re looking to future-proof your home for additional electrification—without overloading your system or investing in unnecessary infrastructure today.
- You value working with a trusted, established company that will be there long-term to support your home energy needs.
It covers most EVs on the road today, thanks to the two connector options. And because it is Energy Star certified, it meets the requirements for most utility rebate programs, which can put money back in your pocket after installation.
Not sure whether your home qualifies for incentives in your state? Qmerit’s State-by-State Guide on EV Charging Rebates and Incentives is a great place to start.
How to Get Schneider Charge Installed at Your Home
Getting Schneider Charge installed at your home is simpler than most people expect, especially when you go through Qmerit.
Schneider Electric recommends Qmerit as its certified installation partner for Schneider Charge. Here is how the process works:
Step 1: Get a quote online in minutes. You do not need to schedule an electrician visit just to get a price. Upload a few photos of your electrical panel and the area where you want the charger installed, and Qmerit’s platform will provide a certified installation estimate fast. No surprises, no guesswork.
Step 2: A certified local electrician is matched to your job. Qmerit connects you with a vetted, certified electrician from its nationwide network who has specific experience with EV charger installations.
Step 3: Your charger is installed, tested, and ready to go. Your installer handles everything from the wiring and mounting to commissioning the unit with the eSetup app. When they leave, your charger is fully functional and your car can start charging that same day.
You do not have to coordinate between the charger manufacturer and an independent electrician. Qmerit handles the whole thing.
STARTING AT $749
Get Your Home EV Charger Installation Estimate
Answer a few quick questions for a quote from America’s #1 EV charger installer.
Why Qmerit? The Installer Behind the Installation
Choosing the right charger is only half the equation. The other half is making sure it is installed correctly, safely, and by someone who knows what they are doing.
Qmerit is North America’s largest network of certified EV charger installers, and the most trusted installation partner recommended by automakers, EV charger manufacturers, utilities, businesses, and homeowners alike.
Here’s what sets Qmerit apart:
- Rated #1 in customer satisfaction among home EV charger installation providers
- Over 770,000 EV charging stations installed in homes and businesses across the U.S. and Canada
- Every electrician is certified, vetted, and background-checked before joining the Qmerit network
- Upfront, transparent pricing so you know exactly what you will pay before anyone shows up at your door
- Expertise with load management installations like Schneider Charge, so you can trust that SmartAmp is set up correctly from day one
Qmerit was built to make home EV charging less intimidating for everyday homeowners. No confusing quotes, no surprise costs on installation day, and no wondering whether the work was done right.
Just a smooth, professional experience from start to finish.
Frequently Asked Questions
What is Schneider Charge and how does it work?
Schneider Charge is a Level 2 home EV charging station made by Schneider Electric. It hardwires directly into your home’s electrical system and can deliver up to 46 miles of range per hour, enough to charge most electric vehicles overnight.
It also includes SmartAmp technology, which automatically adjusts charging speed based on how much electricity the rest of your home is using at any given moment, helping prevent you from exceeding your electrical panel’s capacity.
Can Schneider Charge help me avoid a panel upgrade?
In many cases, yes. Schneider Charge uses SmartAmp load management, which monitors your home’s electrical use in real time using current transformers wired to your panel. When other appliances are drawing power, SmartAmp dials back the charging speed to keep your total usage within safe limits.
When demand drops, it speeds back up. This means many homeowners can install a full-speed Level 2 charger without the added cost of upgrading their electrical panel.
Which EVs are compatible with Schneider Charge?
Schneider Charge is available in two versions to cover the most common EV connector types. The NACS version works with Tesla vehicles and other EVs adopting the North American Charging Standard. The J1772 version works with most other electric vehicles on the road, including models from Ford, Chevrolet, Hyundai, Kia, BMW, Rivian, and many others.
Together, these two options cover virtually every EV available in the U.S. market today.
How long does it take to get Schneider Charge installed?
A standard installation by a Qmerit-certified electrician typically takes two to four hours, depending on your home’s existing electrical setup and how far the charger needs to be from your panel.
You can get an upfront price estimate in minutes by uploading a few photos through Qmerit’s online quote tool. No in-person visit required just to get a price. Once you book, your certified local installer handles everything from wiring and mounting to final setup and testing.
Why should I use Qmerit to install my Schneider Charge?
Qmerit is Schneider Electric’s recommended installation partner and the largest network of certified EV charger installers in North America. With over 770,000 installations completed and a number one rating in customer satisfaction, Qmerit takes the guesswork out of the process.
Every electrician in the network is certified and vetted, pricing is transparent before any work begins, and Qmerit’s team has specific experience with load-managed charger installations like Schneider Charge. You get confidence that the job is done right the first time.
Ready to Get Your Schneider Charge Installed?
Schneider Charge is one of the smartest home EV chargers available today, and with Qmerit handling the installation, getting set up is easier than you might think.
Whether you are installing your first home charger or upgrading an older unit, Qmerit will match you with a certified local electrician, give you an upfront price, and make sure everything is done right.
Get your free installation estimate today. No electrician visit required.
About Qmerit
As North America’s most trusted and largest network of certified EV charger installers, Qmerit is recommended by automakers, EV charger manufacturers (including Schneider Electric), utilities, businesses, and homeowners alike.
Rated #1 in customer satisfaction, our expert network has installed over 770,000 EV charging stations across the U.S. and Canada.
Related Reading:
Starting at $749
EV Charger Installation
Add fast, convenient Level 2 charging to your home with installation from the industry leader.
Home Electrical Work
From everyday repairs to major upgrades, get expert electrical services for your home.